The Cabin Depot is proud to be an authorized distributor for Sigineer Power Products.

Pre-Order this ETL listed All-In-One Inverter System now!

ETA: 3rd Week of August.

This 6,000 watt solar power inverter for home is an integration of a 48V to 120/240V 6KW off grid pure sine wave inverter, a 80A AC charger,  250Vdc 80A MPPT solar charge controllers and a transfer switch in one package.

It is ETL listed to UL1741 and CSA22.2 .

The 6000W solar inverter is a complete package of 80A MPPT solar charge controller, 60A utility charger, transfer switch and a 6000 watt power inverter.
It converts 48v DC power from battery bank or solar power to alternating current ac of 120/240V ac power.
The 80A solar charge can be hooked up to solar panels up to 5KW with VOC (open circuit voltage) up to 250Vdc.
It is designed for off grid solar systems, offering pure sine wave power for all types of loads.
Built with a 80A utility charger, it can also use AC power as backup in hybrid systems.
The 6000W solar inverter works with most types of batteries on the market, it has RS485 communication with a BMS port (battery management system) to communicate with lithium batteries built with the same protocol, such as the full range of Sigineer Power .

The highly programmable LCD screen allows users to set a wide range of inverter specs such as:

• AC output Frequency:50hz or 60hz
• AC output voltage: 208V, 220V, 230V or 240V Split phase
• Power priority: Solar, battery, or utility
• Ac Input voltage range
• Charging current amp & voltage
• Power saver mode
• Auto restart after over temp or low battery voltage shutoff
• Low Battery Cut Off/Alarm
• Transfer voltage between DC & AC

The 6000W solar inverter virtually allows users to change all of its specs within its range. This allows users to set up their own spec for 48 volt Tesla battery modules and other special lithium batteries.
Low Battery Cut Off:36-52Vdc
DC to AC transfer voltage:44-56Vdc
AC to DC transfer voltage:44-58Vdc
CV/Float voltage:48-58.4Vdc

FEATURES

• 6000 watt low frequency inverter
• 48Vdc input 120/240 Volt output
• 18000 watt surge for 5 seconds
• 4 Different Power Priority Modes
• Utility charger 60 Amp, MPPT Charger 80A
• 10msec typical transfer time
• Auto load sense with power saver
• Rich protective features
• Programmable low battery cut-off
• Extremely efficient stand by circuit with 15 watt idle
• No interference with equipments like TV, radio, etc.
• Capable of working with microwave ovens
• Exclusively designed AC- and DC – line filters for clean power output

SPECIFICATIONS

Inverter Output Specifications:
• Continuous Output Power: 6000 Watts
• Surge Rating: 18000 Watts 5 seconds
• Output Waveform: Pure Sine/Same as input (Bypass Mode)
• Output Voltage: 104/208V, 110/220V, 115/230V, 120/240Vac (Programmable on LCD)
• Nominal Efficiency: 85% (Peak)
• Line Mode Efficiency: >95%
• Output Frequency: 50Hz /- 0.3Hz / 60Hz /- 0.3Hz
• Typical Transfer Time: 10ms (Max)
• THD: <10%

DC Input Specifications:
• Nominal Input Voltage: 48.0Vdc
• Low Battery Cutoff: 36.0-52Vdc / 5%-50% SOC
• Low Battery Alarm: 38-54Vdc / Low Battery Cutoff SOC 5%
•DC to AC Transfer: 44-54V / 5%-50% SOC
•AC to DC Transfer in : 44-58V / 60%-100% SOC
• High Voltage Cutoff: AGM:60V/FLD:62V/ USE mode: C.V 4V
• High Voltage Recovery: 58V

• Idle Consumption: 80 Watts
• Power Saver Mode Idle Consumption: 20 Watts

Charger Specifications:
• Ac Input Voltage For Charger: Nominal 240Vac (154-260Vac)
• Output DC voltage: 48-58.4V
• AC Charger Rate: 0-60Amp
• MPPT Charger Rate: 0-80Amp
• Max Combined Charge Rate: 0-140Amp
• OverCharge Protection Shutdown: 62.8V
• Four Stage Smart Charger

Dimensions:
•Unit Weight: 99lbs/45KG
•Unit Size L x W x H: 540*360*218mm/21.2*14.2*8.7″
•Shipping Weight: 135lbs/61KG
•Shipping Size: L x W x H:760*550*460mm/30*22*18″

Downloads: